Results 1 to 10 of 12

Thread: Fair price for 515E?

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Senior Hostboard Member gortnipper's Avatar
    Join Date
    June 30th, 2008
    Posts
    244
    Follows
    0
    Following
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    3 Post(s)

    Fair price for 515E?

    What is a fair price for 515E drivers?

    I know someone who has half a dozen that are generally in good condition. The only bad thing is that they have two opposite sides of the basket fronts cut down slightly to fit some weird cinema install that they were in. They are parallel cuts straight through the bolt hole so there is still enough basket to mount them well, I think.

    I see them on ebay for $500 each, but this seems high. Does anyone really pay that? What would a fair (to both parties) offer be?

    Thanks.

  2. #2
    Senior Hostboard Member
    Fair price for 515E?


    Old Guy's Avatar
    Join Date
    June 23rd, 2003
    Posts
    6,351
    Follows
    0
    Following
    0
    Mentioned
    2 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    60 Post(s)

    Re: Fair price for 515E?

    For E's that is very high. The E is considered less desirable than earlier or later ones. Personally I'd think $250 and less with cut frames.

    The 16 inch frame has to be cut to fit in older 210's. Later 210's are widened.
    Your neighbors called. They like your music.

  3. #3
    Senior Hostboard Member valhallax's Avatar
    Join Date
    March 5th, 2006
    Posts
    542
    Follows
    0
    Following
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    1 Post(s)

    Re: Fair price for 515E?

    e's in an 828 cab pound..i mean drive ya off the couch, type pound! so i bought another pair and loaded the garage pair of 210's. for what it's worth, the cut sides are strictly a cosmetic issue and wont effect sonics
    "those sounds to which no definite pitch can be assigned are usually classified as noise"<br />harvey fletcher-1928

  4. #4
    Senior Hostboard Member gortnipper's Avatar
    Join Date
    June 30th, 2008
    Posts
    244
    Follows
    0
    Following
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    3 Post(s)

    Re: Fair price for 515E?

    Quote Originally Posted by Old Guy View Post
    For E's that is very high. The E is considered less desirable than earlier or later ones. Personally I'd think $250 and less with cut frames.

    The 16 inch frame has to be cut to fit in older 210's. Later 210's are widened.
    Which of the 515s are best and why?

  5. #5
    Senior Hostboard Member
    Fair price for 515E?


    Old Guy's Avatar
    Join Date
    June 23rd, 2003
    Posts
    6,351
    Follows
    0
    Following
    0
    Mentioned
    2 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    60 Post(s)

    Re: Fair price for 515E?

    Here are one qualified person's opinions

    altec

    I never liked the E as well myself, if the unit will seal, the cut frame is mostly cosmetic. But it creates a weak point. And devices always fail at a weak point. I would pay less for cut frames.
    Your neighbors called. They like your music.

  6. #6
    Senior Hostboard Member bowtie427ss's Avatar
    Join Date
    July 24th, 2006
    Location
    Rural NY
    Posts
    3,894
    Follows
    0
    Following
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    25 Post(s)

    Re: Fair price for 515E?

    There are at least two variations of 515E.

    This type(some of us call them "flat magnet" style) pretty much sucks, in my next life i will try them loaded with 416 parts:

    515Ea.jpg

    This type(rounded magnet) ain't so bad, IMO as good as 515G in the small horns like 828, 816, and 817:

    ALTEC515E1.jpg

    I tell a similar tale about the 416C...........................
    Not all vegetables make good leaders.

  7. #7
    Senior Hostboard Member gortnipper's Avatar
    Join Date
    June 30th, 2008
    Posts
    244
    Follows
    0
    Following
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    3 Post(s)

    Re: Fair price for 515E?

    They are the rounded magnet type.

    The tale is the same on the 416C, meaning rounded vs. flat magnets?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
This forum has been viewed: 23808158 times.